1. holding: supporting the bottom of the machine with the four figures of your right hand, and then putting your thumb on the top of the machine for holding the machine tightly
2. threading: drawing the lisle softly from the bobbin and treading it from winding, and then put it in the tension controller. Then threading it through the winding. Putting the top of the lisle beside the needle, and then threading the lisle through the needle by using the threader
3. lift up the cloths fastening plate with right forefinger and putting the cloth (less than 0.8mm gauge) under the fastening plate
4. pressing the top of the machine up and down and do over, then the right hand should move to right step by step and let left hand hold the cloth |